Click To Visit JMR Store

Author Archive

2×4 JMR Fabrication Table and Leg Kit

Friday, June 4th, 2010

2x4_jmr_fabtable

JMR Manufacturing has been hard at working getting new tools ready for market.  The JMR fabrication tables have been a huge hit in many different industries and for the at home fabricator.  The tables can be purchased in various sizes and custom sizes also.  Standard sizes start at 2x4x3/8 and go up depending on your need. JMR can also manufacture thick table tops blanchard ground and add machined holes for the more serious fabricators.

The new leg kits are manufactured from CNC laser cut plate 3/16″ thick and then formed on a press brake.  Dimple Die flares are added for extra strength.  The feet do have pre-drilled holes for you to add levelers or casters depending on your need.  Leveling feet and casters can be sourced through JMR or purchased from your favorite hardware company.  They are not included with the table top or leg kit.

The introductory price for the 2x4x3/8 JMR fabrication table top is 595.00 plus freight.  The table in this form comes with (4) JMR legs, (1) pre-welded on base to the table, (1) table top, and hardware to bolt the legs to the table base.  Once received all you have to do is bolt the legs on and start fabricating.

JMR does offer angle block kits and clamp down kits.  Call for details.

100_0574 100_0576 100_0577 100_0579
Categories : Featured Tools
Comments (0)

Drilling Through Tube With the JMR TN1000

Thursday, May 6th, 2010

The JMR TN1000 Tube and Pipe Notcher is the most versatile hole saw notcher available.  We have been posting different tasks that can be accomplished with the JMR notcher.  Unlike notchers that are large, bulky, and clamp all the way around the tube the JMR notcher can be used on a vehicle or project.  What I mean is after tube is welded in place on your vehicle the JMR notcher can be clamped directly on the project to drill holes and even notch tube.  The following pictures show how you can use a 3/4″ hole saw to drill through tube to insert a weld in shock bung.  This can be VERY useful drilling in position to ensure shock mount locations are exact.

The JMR notcher can drill through square tube on the flats or on the diamond.  On the diamond refers to through the points.  Again a big advantage is the holes can be drilled in place after your project is welded together.

101_0382 101_0389 101_0395 101_0397
Categories : How To
Comments (0)

Notching Short Pieces Of Tube

Thursday, April 29th, 2010

The JMR TN1000 hole saw notcher has a movable vise which allows it to notch very short pieces of tube.  In the pictures you will see how the vise slides up close to the hole saw.  The JMR TN1000 is the ONLY hole saw notcher on the market with a movable vise.  JMR incorporated this design feature because the person designing the tool actually has practical fabrication experience and very little experience staring at an office wall.  Notching short sections of tube is only one feature the JMR TN1000 offers.

See more pictures of the JMR TN1000 HERE.

You can find the notcher in our ONLINE STORE HERE.

Another great feature the JMR TN1000 offers is the ability to notch flat bar.  You can read more about this feature and see pictures of the TN1000 in action by looking HERE.

101_0332

101_0335

101_0333

101_0337

OK, now you have seen the most logical way to notch a short piece of tube.  Now I will show you a way to notch tube even shorter.  The method pictured below is from years of experience in the shop fabricating race trucks not sitting on the internet reading about how others fabricate.  If you EVER have questions about how to use a JMR tool feel free to call or email.

If you would like to make the tool used in the JMR TN1000 below it is very simple to do.  Cut a 5 inch piece of tube that will slide over the tube you want to notch.  With a cut off wheel cut a slot down the length of the tube. Make sure to leave about 1/2 at the end of the slot.  In other words DO NOT cut all the way down.  The slot is cut in the tube to allow it to clamp down around the work piece. Make sure the 1/2 inch you left is at the opposite end from the piece you are notching.  Insert the short piece of tube you want to notch and clamp down in position.  The JMR vise will allow you to clamp down firmly to hold the short piece of notched tube.  If you have a different brand of notcher you can can still do this procedure.  Depending on the brand notcher you have you may have to use a radiator hose clamp out toward the end of the tube to help hold the tube.

101_0375

101_0374

101_0377

Categories : How To
Comments (0)

JMR Hydraulic Bender Assembly Instructions

Friday, April 16th, 2010

JMR Hydraulic Bender Assembly Instructions for Part Number 1000, 1001, and 1002.  If you have any questions feel free to call or email.  You can open a printable PDF by clicking the following link:

www.jmrmfg.com/manuals/jmr_hb.pdf

Click the below image to enlarge:

Categories : How To
Comments (0)

Tube Bending Software from Bend-Tech

Tuesday, April 13th, 2010

JMR Manufacturing offers a complete line up of tube bending software from Bend-Tech.  Bend-Tech is the industry leader in tube bending software.  The easy to use software features a user interface that will allow beginners to pros the ability to design within the first couple of hours.  Be sure to check out the Bend-Tech line up in the JMR online store. CLICK HERE

Categories : Featured Tools
Comments (0)

Making Tabs with a JMR TN 1000

Tuesday, March 9th, 2010

dsc_8952

The JMR TN1000 was designed to notch tube and pipe.  You can also cut flat bar to make brackets and tabs.  Below are some pictures we took this weekend at a trade show demonstrating this process to on lookers.  The flat bar in the demo is 1/8 inch thick.  You would not have a problem cutting thicker flat bar.  If you have any questions be sure to post up below or feel free to contact us.

dsc_8954

Categories : Featured Tools
Comments (1)

Get Your FREE JMR Sticker

Tuesday, March 9th, 2010

JMR Manufacturing is offering a FREE sticker deal to our customers and fans.  It is very simple to claim your FREE JMR Manufacturing Sticker.  The stickers measure roughly 2.5 inches tall by 6 inches wide.  The FREE Sticker offer from JMR will include 2 free stickers.  The actual sticker may vary from what is pictured depending on available stickers when your free sticker request is made.  We will have larger sizes available for purchase on our website.

If you would like to claim a free JMR Sticker you need to do the following:

Send (one) SELF ADDRESSED STAMPED ENVELOPE.  The envelope can be a standard business size envelope.  If you send in an over sized envelope it does not mean we will be sending out more stickers or a larger sticker.

_________________________

Mail the envelope to:

JMR Manufacturing

Attn: FREE Sticker Offer

P.O. Box 606

Creston, CA 93432

Categories : News
Comments (1)

JMR “My First Race Car”

Thursday, March 4th, 2010

1Jim Mckinzie is no stranger to the off-road racing world.  When it came time to put his kid in a power wheels for Christmas he thought he could do one better.  I have to agree the end result would be a dream for most car loving kids.  What kid would not want a custom built full tube chassis power wheels for Christmas?  To top it all off it even has billet a-arms.

You can read more about this project on Race-Dezert.

Categories : News
Comments (3)

Fabrication Tables

Monday, March 1st, 2010

dsc_8786JMR Manufacturing is in the process of putting together a complete line of fabrication tables for the DIY fabricator and professional fabricators.  You will soon be able to order from a pre-designed list of fab tables and have it shipped to your home or business.  JMR will also be offering custom fabrication tables if needed.  The tables will be offered as table tops only or with stands.

The first fabrication table offered by JMR is the 2 foot x 4 foot, 3/8″ thick table top.  The 2′x4′x3/8″ can be used in both residential and commercial applications.  You will notice in the pictures the table features slots.  The slots are to be used with a clamp down kit like used on a milling table.  The table allows you to clamp your work in multiple areas.  You can also use them to bolt down fixtures for many different things.  One example is building a-arms for independent suspensions.  We will also be offering “V” blocks to hold round tube on our fab tables.  More information will soon follow.

Pricing for JMR Manufacturing Fabrication Table Tops will start and $195.00 for the 2x4x3/8. and go up depending on thickness and overall size.  JMR will be releasing a 3×4, 4×4, and a 4×6 fab table very soon.  Some of these will be offered in thicker versions and blanchard ground.  Some of the thicker tables will feature drilled and tapped holes for studs.

INTRODUCTORY PRICING

2x4x3/8 $195.00

3x4x3/8 $295.00

4x4x3/8 $395.00

4x6x3/8 $495.00

Categories : Featured Tools
Comments (1)

JMR Tube Saws / Hole Saws

Thursday, February 25th, 2010

jmr_tubesaw_ad

JMR offers a complete line of tube saws  / hole saws.  The JMR Tube Saws are threaded with a standard thread like other hole saws.  JMR hole saws are a perfect addition to the JMR Tube Notcher TN1000.

The JMR Hole Saws / Tube Saws were designed for notching tube. The extra length on the long tube saws allow you to cut high angle notches without the need to stop and break off the end of the tube. All JMR Tube Saws are fine tooth with more teeth per inch than conventional hole saws. The body of the JMR Tube Saw is heat treated after they are rolled and welded, giving them a harder tooth and a more true shape. The heat treated body has not coating to flake off and contaminate your weld area. The body of the JMR Tube saws are also thicker than conventional hole saws. The hole saws will thread onto any tube notcher.

Categories : Featured Tools
Comments (1)