The JMR TN1000 was designed to notch tube and pipe. You can also cut flat bar to make brackets and tabs. Below are some pictures we took this weekend at a trade show demonstrating this process to on lookers. The flat bar in the demo is 1/8 inch thick. You would not have a problem cutting thicker flat bar. If you have any questions be sure to post up below or feel free to contact us.
JMR Manufacturing is in the process of putting together a complete line of fabrication tables for the DIY fabricator and professional fabricators. You will soon be able to order from a pre-designed list of fab tables and have it shipped to your home or business. JMR will also be offering custom fabrication tables if needed. The tables will be offered as table tops only or with stands.
The first fabrication table offered by JMR is the 2 foot x 4 foot, 3/8″ thick table top. The 2′x4′x3/8″ can be used in both residential and commercial applications. You will notice in the pictures the table features slots. The slots are to be used with a clamp down kit like used on a milling table. The table allows you to clamp your work in multiple areas. You can also use them to bolt down fixtures for many different things. One example is building a-arms for independent suspensions. We will also be offering “V” blocks to hold round tube on our fab tables. More information will soon follow.
Pricing for JMR Manufacturing Fabrication Table Tops will start and $195.00 for the 2×4x3/8. and go up depending on thickness and overall size. JMR will be releasing a 3×4, 4×4, and a 4×6 fab table very soon. Some of these will be offered in thicker versions and blanchard ground. Some of the thicker tables will feature drilled and tapped holes for studs.
JMR offers a complete line of tube saws / hole saws. The JMR Tube Saws are threaded with a standard thread like other hole saws. JMR hole saws are a perfect addition to the JMR Tube Notcher TN1000.
The JMR Hole Saws / Tube Saws were designed for notching tube. The extra length on the long tube saws allow you to cut high angle notches without the need to stop and break off the end of the tube. All JMR Tube Saws are fine tooth with more teeth per inch than conventional hole saws. The body of the JMR Tube Saw is heat treated after they are rolled and welded, giving them a harder tooth and a more true shape. The heat treated body has not coating to flake off and contaminate your weld area. The body of the JMR Tube saws are also thicker than conventional hole saws. The hole saws will thread onto any tube notcher.
JMR Manufacturing is now offering Lincoln Welders. If you are looking to purchase a welder be sure to add it to your tube bender package. JMR Manufacturing offers financing to help you afford the tools you need to succeed. You can find more information to finance your new tubing bender and welder by CLICKING HERE.
Lincoln Electric offers both tig and mig welders. If you are a beginner and unsure what welder you should purchase feel free to contact JMR for advise on the best machine for your application. Keep in mind Lincoln Electric also offers plasma cutters. A plasma cutter is used to cut different types of metal plate and sheet metal.
JMR Manufacturing is now offering Dake brand fabrication tools. Dake has a large line of tooling with the fabricator in mind. Dake has an impressive line of presses, cold saws, drill presses, power hammers, and more. Keep in mind you can finance tools for your shop through JMR Manufacturing. So put together a package for your shop and let us see what we can do to get your shop more efficient.
The JMR Series of hydraulic tube benders are precision machined units that offer large capacities, fast hydraulic systems, and unique portability. Both electric and air powered units offer the same capacity. Built for the fabricator looking for a top quality bender to suit most structural applications.
Electric/Hydraulic Features
Specifications
The JMR MB 1000 series Manual Tube Bender is a precision machined tool that offers heavy wall tube bending capacities. Built for the fabricator looking for a quality tube bender that can meet most structural applications around the shop. The MB 1000 is set apart from the competition with bronze bushings at the pivot point, a bearing supporting the ratcheting mechanism, lifetime guarantee on the dies, and available anti-springback bar. The JMR MB 1000 features blanchard ground arms for a precision fit and function.
Product Review on Pirate4×4.com with many pictures and videos featuring the JMR MB 1000.
See the JMR Manual Bender in our ONLINE STORE
The JMR TN-1000 Tubing and Pipe Notcher is a premium tool and the most versatile hole saw notcher on the market. The TN-1000 is manufactured from bar stock, not plate, to increase strength. The TN-1000 has a 1.125″ induction hardened shaft supported by Timken bearings. The custom designed shaft seals prevent bearing and shaft damage over years of service. The shaft accepts replaceable hole saw mounting threads.
Angle changes are made simple due to a Timken thrust bearing at the pivot point. The JMR TN-1000 can be rotated 180 degrees around the end of the tube to get the angle you need from either side of the tube. The TN-1000 will also do offset notches with the addition of our shim package.
Bill “BillaVista” Ansell wrote a product review article for Pirate4×4.com detailing the JMR TN 1000 and basic tube notching tips. Be sure to check out the Pirate4×4 article as BilliaVista writes to “introduce you to the JMR TN1000 tube notcher and demonstrate some of the techniques used in notching tube with a hole-saw notcher.”
JMR TN 1000 in the ONLINE STORE
JMR TN 1000 Article on Pirate4×4.com
JMR TN-1000 Instruction Manual
JMR Manufacturing offers a wide range of tube bender dies. JMR tube bender dies feature billet construction. The die sets are available in 120 degree and 240 degree angles. If you do not see the tube bender die size to fit your project be sure to CONTACT JMR. We may be able to offer a solution to your need. All JMR tube bender dies have a Lifetime Warranty.
ROUND TUBE DIES |
||
| 120350625 | .5”&.625”x3” Radius 120° Combo Die | $250.00 |
| 1203075 | .75”x3” Radius 120° Die | $185.00 |
| 12030875 | .875”x3” Radius 120° Die | $190.00 |
| 12040875 | .875”x4” Radius 120° Die | $235.00 |
| 1203100 | 1”x3” Radius 120° Die | $210.00 |
| 1204100 | 1”x4” Radius 120° Die | $225.00 |
| 1205100 | 1”x5” Radius 120° Die | $325.00 |
| 12031125 | 1.125”x3” Radius 120° Die | $210.00 |
| 1203125 | 1.25”x3” Radius 120° Die | $325.00 |
| 1204125 | 1.25”x4” Radius 120° Die | $260.00 |
| 12041375 | 1.375”x4” Radius 120° Die | $310.00 |
| 1204150 | 1.5”x4” Radius 120° Die | $310.00 |
| 1205150 | 1.5”x5” Radius 120° Die | $310.00 |
| 1206150 | 1.5”x6” Radius 120° Die | $375.00 |
| 1207150 | 1.5”x7” Radius 120° Die | $650.00 |
| 12051625 | 1.625”x5” Radius 120° Die | $340.00 |
| 12061625 | 1.625”x6” Radius 120° Die | $375.00 |
| 12071625 | 1.625”x7” Radius 120° Die | $650.00 |
| 1206175 | 1.75”x6” Radius 120° Die | $375.00 |
| 1207175 | 1.75”x7” Radius 120° Die | $700.00 |
| 1206200 | 2”x6” Radius 120° Die | $400.00 |
| 1207200 | 2”x7” Radius 120° Die | $725.00 |
| 1207225 | 2.25”x7” Radius 120° Die | $750.00 |
| 1207250 | 2.5”x7” Radius 120° Die* | $775.00 |
| 240350625 | .5”&.625”x3 Radius 240° Die | $325.00 |
| 2403075 | .75”x3” Radius 240° Die | $220.00 |
| 24030875 | .875”x3” Radius 240° Die | $225.00 |
| 2403100 | 1”x3” Radius 240° Die | $275.00 |
| 2404100 | 1”x4” Radius 240° Die | $350.00 |
| 2405100 | 1”x5” Radius 240° Die | $450.00 |
| 24031125 | 1.125”x3” Radius 240° Die | $290.00 |
| 2403125 | 1.25”x3” Radius 240° Die | $385.00 |
| 2404125 | 1.25”x4” Radius 240° Die | $325.00 |
| 2404150 | 1.5”x4” Radius 240° Die | $390.00 |
| 2405150 | 1.5”x5” Radius 240° Die | $390.00 |
| 2406150 | 1.5”x6” Radius 240° Die | $400.00 |
| 2407150 | 1.5”x7” Radius 240° Die | $775.00 |
| 24051625 | 1.625”x5” Radius 240° Die | $425.00 |
| 24061625 | 1.625”x6” Radius 240° Die | $500.00 |
| 24071625 | 1.625”x7” Radius 240° Die | $825.00 |
| 2406175 | 1.75”x6” Radius 240° Die | $500.00 |
| 2407175 | 1.75”x7” Radius 240° Die | $825.00 |
| 2406200 | 2”x6” Radius 240° Die | $550.00 |
| 2407200 | 2”x7” Radius 240° Die | $950.00 |
| 2407225 | 2.25”x7” Radius 240° Die* | $975.00 |
| 2407250 | 2.5”x7” Radius 240° Die* | $1,095.00 |
SQUARE DIES |
||
| 1203075S | .75”x3” Radius 120° Square Die | $250.00 |
| 1204075S | .75”x4” Radius 120° Square Die | $295.00 |
| 1203100S | 1”x3” Radius 120° Square Die | $250.00 |
| 1204100S | 1“x4” Radius 120° Square Die | $270.00 |
| 1204125S | 1.25”x4” Radius 120° Square Die | $325.00 |
| 1205125S | 1.25”x5” Radius 120° Square Die | $340.00 |
| 1205150S | 1.5”x5” Radius 120° Square Die | $390.00 |
| 1206150S | 1.5”x6” Radius 120° Square Die | $395.00 |
| 1206175S | 1.75”x6” Radius 120° Square Die | $475.00 |
| 1206200S | 2”x6” Radius 120° Square Die | $525.00 |
| 1207200S | 2”x7” Radius 120° Square Die | $825.00 |
| 2403075S | .75”x3” Radius 240° Square Die | $295.00 |
| 2404100S | 1”x4” Radius 240° Square Die | $325.00 |
| 2404125S | 1.25”x4” Radius 240° Square Die | $400.00 |
| 2405125S | 1.25”x5” Radius 240° Square Die | $400.00 |
| 2405150S | 1.5”x5” Radius 240° Square Die | $495.00 |
| 2406150S | 1.5”x6” Radius 240° Square Die | $550.00 |
| 2406175S | 1.75”x6” Radius 240° Square Die | $650.00 |
| 2406200S | 2”x6” Radius 240° Square Die | $695.00 |
| 2407200S | 2”x7” Radius 240° Square Die | $1,095.00 |
PIPE DIES |
||
| 1203075P | .75”x3” Radius 120° Pipe Die | $215.00 |
| 1204100P | 1”x4” Radius 120° Pipe Die | $275.00 |
| 1205125P | 1.25”x5” Radius 120° Pipe Die | $350.00 |
| 1206150P | 1.5”x6” Radius 120° Pipe Die | $405.00 |
| 1206200P | 2”x6” Radius 120° Pipe Die* | $500.00 |
| 1207200P | 2”x7” Radius 120° Pipe Die* | $725.00 |
| 2403075P | .75”x3” Radius 240° Pipe Die | $305.00 |
| 2404100P | 1”x4” Radius 240° Pipe Die | $350.00 |
| 2405125P | 1.25”x5” Radius 240° Pipe Die | $425.00 |
| 2406150P | 1.5”x6” Radius 240° Pipe Die | $625.00 |
| 2406200P | 2”x6” Radius 240° Pipe Die* | $725.00 |
| 2407200P | 2”x7” Radius 240° Pipe Die* | $1,095.00 |
*Requires BS100 Bender Spacer Kit
***Prices subject to change without notice
All JMR Manufacturing Tube Bender Dies have a LIFETIME WARRANTY. If you have any questions about what die you need feel free to CONTACT JMR for assistance.
JMR Manufacturing offers bullet proof DIMPLE DIE SETS for fabricators who need their tools to work. If you are looking for cheap knock off JMR dimple dies you are in the wrong place. The Official JMR Dimple Die Sets are CNC machined and hardened to serve as a lifetime tool. JMR Dimple Dies have a LIFETIME WARRANTY.
JMR Dimple Dies will flare existing holes in sheet metal and plate up to .125″ 4130 Chrome Moly
JMR Manufacturing offers Dimple Die sets in many different combination. Please visit out online store for ordering details or please call 805-239-5972.
