This die set bends 1-1/4" pipe (1.660" OD) on a 4" centerline radius, up to 110°, which covers standard 90° bends with room for springback. It's the tightest radius we make for 1-1/4" pipe, so it keeps bends compact where space is short. 1-1/4" pipe is commonly used for handrails (1-1/4" Schedule 40 is a standard handrail pipe size).

It's rated for Schedule 10 to Schedule 80 steel and aluminum pipe. We also make 1-1/4" pipe dies in 5" CLR, 6" CLR and 7" CLR.

Need to bend past 110°? The 240° version of this 1-1/4" pipe x 4" CLR die bends all the way to 180°.

Each set includes the radius die, follower block, U-strap and U-strap pin, and it fits every JMR bender, manual or hydraulic. Lube isn't required, but a little on the follower (not the radius die) gives cleaner bends. Made in the USA, with a limited lifetime warranty against breakage when used within its rated size and wall.

1-1/4" pipe die set (4" CLR, 120°) specifications
Capacity
Pipe size 1-1/4"
Outside diameter 1.660"
Materials steel and aluminum pipe
Wall thickness Sch 10 to Sch 80
Bend
Centerline radius 4"
Die 120°
Maximum bend 110°
Size and support
Fits All JMR manual and hydraulic benders
Included Radius die, follower block, U-strap and U-strap pin
Shipping dimensions 10" × 10" × 3"
Shipping weight 15 lb
Part number 1204125P
Made in Paso Robles, California, USA
Warranty Limited lifetime

What benders will this fit?
Our dies fit every JMR bender, manual or hydraulic. Customers have also used our dies in Pro-Tools, Woodward, Eastwood and JD2 Model 3 benders, but we cannot guarantee the fit on any other brand.
What comes in a die set?
Four pieces: the radius die, the follower block, the U-strap and the U-strap pin.
Should I get the 120 or the 240 degree die?
A 120 degree die bends up to 110 degrees after springback, and a 240 degree die bends up to 180 degrees. Choose the 240 if you need U-bends or returns. Otherwise the 120 costs less.
How do I choose a centerline radius?
If you are trying to match an existing weldment, use our printable radius template. For new bends, use our CLR recommendation page, or check the specs on each die for your desired material to see if you're within range.
How do I know if I have tube or pipe?
Measure across the outside. Pipe is named by its inside size, so 1-1/4" pipe measures well over 1-1/4" across. Tube measures the same as its name and needs a tube die.
Do I need lubricant?
We recommend using lubricant because it improves bend quality. Use lubricant on the follower block ONLY, never on the radius die.
What warranty does it come with?
Our dies come with a limited lifetime warranty. It covers the die against breakage when it is used within its listed material size and wall thickness.
Do you make custom dies?
Yes. We have made hundreds of custom dies, from ultra-tight radii to 2-1/2" angle iron. To ask about one, call us at (805) 239-5972 or email us at info@jmrmfg.com.

Customers Also Bought

     American-Made Fabrication Tools 

    JMR Manufacturing is a family-owned company built in Paso Robles, CA. We design and manufacture fabrication tools right here in the USA — built to the standard we'd want in our own shop. Questions or custom orders:

    (805) 239-5972 · info@jmrmfg.com